Flushing the oil system

Properties

This agent dissolves and removes carbon deposits, varnish-tar deposits and other contaminants on the parts of the cylinder-piston group, releasing coked piston rings and stuck hydraulic lifters, and neutralizes oil oxidation. Its high-performance lubricating agents simultaneously protect the entire oil system during cleaning. 

Advantages:

• fresh oil in a clean engine 
• ensuring fuel economy by reducing friction and wear of engine parts
• increased engine output
• compliance with exhaust emission standards
• extension of catalyst life.

Scope of application

The product is designed for effective cleaning of oil systems of both 4-stroke and diesel engines, as well as manual gearboxes and differentials.

Mode of application

Add the product to the old oil when the engine is warm, just before changing it. Start the engine and let it idle for 10-15 minutes. Then drain the used oil, replace the oil filter and fill the engine with fresh oil in accordance with the manufacturer’s instructions.

Consumption

300 ml is designed for an oil volume of up to 5 liters or use in a mixing ratio of 1:15.

Exposure time

Approximately 15 minutes with the engine running at idle.